Panel Profile Layout
General Specification
- Panel Coverage: 18” standard
- Rib Height: 2”
- 24 gauge Substrate: Galvanized (G-90)
- Energy Star approved Cool Roof pigments in all paint, reflecting at least 25% of the sun’s rays
- Minimum roof slope: ¼:12 pitch
- Single (90°) or Double (180°) Seaming Available
- Choose from striations, bead ribs, or a smooth flat-pan between ribs
- Weather-tight warranty options available – call for details
- Floating clip or fixed clip options available
- Factory applied side lap sealant available
- Mechanically seamed panels may be installed directly over open purlins or solid sheathing
- Panels cut to any manageable length in one inch increments
Jobsite roll-forming is available, which:
- allows for longer panel lengths
- eliminates the possibility of damage during delivery
- eliminates crating cost and inconvenience
Custom Metal Options
- 22 gauge, Grade D steel
- Pre-painted Aluminum
24 Gauge Colors
-
- SMP Charred Cedar
-
- PVDF Matte Colonial Red
-
- PVDF Matte Dark Bronze
-
- PVDF Matte Dark Gray
-
- PVDF Matte Evergreen
-
- Galvalume
-
- PVDF Matte Light Bronze
-
- PVDF Matte Black
-
- PVDF Matte Regal White
-
- PVDF Matte Slate Gray
-
- PVDF Matte Sandstone
-
- PVDF Weathered Zinc
| Gauge | 24 |
|---|---|
| Rib Height | 2″ |
| Panel Coverage | 18″ width |
| Substrate Thickness | .0236″ min |
| Substrate Coating | G90 |
| Tensile Strength | 50,000 psi min (for UL) |
| Substrate ASTM Rating | ASTM A653 |
| Paint Coating | |
| Colors Available | 10 colors |
| Surface Protector | |
| Paint Warranty | 40 Year Limited Warranty |
| Energy Star Approved | Yes |
| Primer Thickness | .3 mils top |
| Paint Thickness | .7 mils top |
| Seaming Bend Options | Single (90deg) or Double (180deg) |
| Pan Options (between ribs) | Striations, Bead Ribs, Smooth Flat Plan |
Panel Profile Layout
Panel Profile Layout
Image Gallery